Hometo the Main Chair Pros page Hometo all Chair Pros products Productsto About Chair Pros About Usto Contact Us Contact
  LUX DOmore 3312 XXL
to Workstations Workstationsto accessories Accessories to ergonomic chairs Ergonomic Chairs
Models:
24 Hour Chairs
3312 XXL
3312 HB
3312 HBXL

Lux 24/7 HD
3312 XXL-ATI arms
Capacity: 700 pounds
Seat: 32 3/4" wide x 23"deep.
Back: 25" wide x 25" high.
Arms: 3" wide x 10" deep x 1 1/2" thick
Seat Height from Floor: 18" to 22 1/2"
Back Height Adjustment: 2 1/2"
Range from 25"
Inside Arm Clearance: 32" to 34 1/2"
3312 XXL - 24/7, Big and Tall
Base:
  • Eight leg, 16 gauge formed steel welded base with support puck to all legs.
  • Caster sockets fusion welded by electric wire for strength.
  • Black finish.

Casters:
  • Eight (8), 2 1/2" single wheel steel ball bearing casters (hard or soft tread).
  • Eight (8), 2 1/2" dual wheel casters are optional.

Seat Assembly:
  • Cast aluminum seat control bed assembly.
  • Heavy Duty pneumatic height adjustment cylinder, Rated For XL Use - DIN 4 Class
  • Backrest tilt tension adjustment via Domore "Custom-Fit" fingertip control wheel, while at a seated position.
  • Multi-Ply hardwood seat board, with metal threaded inserts for attachments.
  • Heavy Duty hand tied coil spring seat cushion.
  • 1.1 oz. Dacron Seat Batting and 1.5" topper cushion.

 Back Support Bar:
  • 1. Cold rolled, solid bar stock steel back bar, 1/4" thick x 4" wide.
  • Concealed 4" (vertical) back lumbar adjustment from seated position.

Arm Bar Supports and Arm Pad Rests:
  • Cold rolled, solid bar stock steel arm bars, attached to metal seat control, 3/8" thick x 2" wide steel.
  • Soft cushion Urethane arm supports are standard
  • Vinyl coated, cast aluminum for sharp edges is optional.
  • Upholstered arm pads, matching chair fabric is optional.
  • Arms can be reset up to 2" outward or inward.
    6. Arms can be changed, added, or deleted in field easily.

Backrest:
  • One-piece molded, ergonomically shaped, multi-ply wood composite.
  • Multi-density poly back cushions with concealed lumbar roll (horizontal).
  • Fully fabric upholstered matching back is optional.
Other 3312 Models



3212 HB
Seat: 21 1/4" wide x 17 1/2" deep.
Back: 19" wide x 29" high.
Arms: 3" wide x 10" deep x 1 1/2" thick.
Seat Height from Floor: 17" to 21 1/2"
Back Height Adjustment: 2 1/2" range from 21 1/2"
Inside Arm Clearance: 19 1/4" to 21 1/4"



Base:
  • Five leg, 16 gauge formed steel welded
    base with support puck to all legs.
  • Caster sockets fusion welded by electric
    wire for strength.
  • Black finish.

Casters:
  • Five (5), 2 1/2" single wheel steel ball
    bearing casters (hard or soft tread).
  • Five (5), 2 1/2" dual steel casters are optional.
3312HBXL
Seat: 25 1/2" wide x 20 1/2" deep.
Back: 20 1/2" wide x 29" high.
Arms: 3" wide x 10" deep x 1 1/2" thick
Seat Height from Floor: 18" to 22 1/2"
Back Height Adjustment: 2 1/2" range from 29"
Inside Arm clearance: 23 3/4" to 25 3/4"

Base:
  • Six Leg, 16 gauge formed steel welded base with support puck to all legs.
  • Caster sockets fusion welded by electric wire for strength.
  • Black finish.

Casters:
  • Six (6), 2 1/2" single wheel steel ball bearing casters (hard or soft tread).
  • Six (6), 2 1/2" dual wheel casters are optional.

Seat Assembly:
  • Cast aluminum seat control bed assembly.
  • Heavy Duty pneumatic height adjustment cylinder, Rated DIN Class-4
  • Backrest tilt tension adjustment via Domore "Custom-Fit" fingertip control wheel to spring tubes, while at a seated position.
  • Multi-Ply hardwood seat board, with metal threaded inserts for attachments.
  • Heavy Duty hand tied coil spring seat cushion.
  • 1.1 oz. Dacron eat Batting and 1.5" topper cushion.

Back Support Bar
  • Cold rolled, solid bar stock steel back bar, 1/4" thick x 4" wide.
  • Concealed 4" (vertical) back lumbar adjustment from seated position.
  • Attached Mechanical SchukraTM lumbar wheel adjustment (horizontal).

 Arm Bar Supports and Arm Pad Rests:
  • Cold rolled, solid bar stock steel arm bars, attached to metal seat control, 3/8" thick and 2" wide.
  • Soft cushion Urethane arm supports are standard.
  • Vinyl coated, cast aluminum for sharp edges is optional.
  • Upholstered arm pads, matching chair fabric is optional.
  • Arms can be reset up to 2" outward or inward.
    Arms can be changed, added, or deleted in field easily.

Backrest:
  • One-piece molded, ergonomically shaped, multi-ply wood composite.
  • Multi-density poly back cushions with concealed lumbar roll (horizontal).
  • Backrest protected by polyethylene-textured shell and PVC bumper strip.
  • Fully fabric upholstered matching back is optional.
        DOmore     DoMore LUX
    distributed by Chair Pros Big and Tall
View Fabrics
Chair Pros - Orange County's Business Chairs and Ergonomic Office Equipment
brought to your office.
Copyright ©2002- Erik Borg, All Rights Reserved